Camille Bauer, Switzerland, Measurement engineering

Home Heavy current

Multifunctional devices

Heavy-current engineering, multifunctional devices

Our multifunctional heavy-current transducers are programmable and may be used for the measurement of almost all quantities of an electrical power system. The application (system configuration) as well as the behaviour of the analog and digital outputs are software configurable. The measurand acquisition via programming or bus interface during normal operation is also supported.

Device function
Combination devices		yes
With analog and/or digital outputs		yes
With analog/digital intputs		yes
With variable I/O interface		yes
With communication interface		yes
With display		yes
With data memory		yes
With active/reactive energy meters		yes
With alarm units		yes
Nominal frequency
16.7 Hz		yes
Conventional outputs
Analog outputs		yes
1		yes
2		yes
3		yes
4		yes
6		yes
8		yes
Digital outputs
Digital outputs		yes
1		yes
2		yes
3		yes
4		yes
6		yes
7		yes
9		yes
12		yes
Analog inputs
Analog inputs		selectable: 2, 4, 6 or 8 none
2		yes
4		yes
6		yes
8		yes
Digital inputs
Digital inputs		none selectable: 3, 6, 9 or 12
1		yes
2		yes
3		yes
6		yes
7		yes
9		yes
12		yes
Relay outputs
Relay outputs		yes none
1		yes
2		yes
3		yes
Bus interface
Bus interface		yes
Modbus RTU		yes
LON		yes
Profibus DP		yes
Ethernet		yes
Without Bus interface		yes
Special attributes
System analysis		yes no
Mechanical design
Mechanical design		Housing for rail mounting Plug-in modules for 19" rack Control panel mounting, 144 x 144 mm Control panel mounting, 96 x 96 mm Portable
Power supply
Universal		yes
AC		yes
Li-Ion battery		yes
Certificates
CSA		yes